Cam Follower and Track Roller - Stud Type

Contact Now

Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.

 

 

 

Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.

 

 

 

MCGILL MCF 35 SB Cam Follower and Track Roller - Stud Type

2600 rpm 2100 rpm
355000 N 225.0000 mm

MCGILL MCF 35 BX Cam Follower and Track Roller - Stud Type

0.015 kg 17 mm
16000 r/min 26 mm

MCGILL MCF 32 SX Cam Follower and Track Roller - Stud Type

YARAG 204 68.3 mm
37.3 mm 18.3 mm

MCGILL MCF 35 Cam Follower and Track Roller - Stud Type

115.5 mm 7 kg
145 mm 300 N/mm²

MCGILL MCF 35 B Cam Follower and Track Roller - Stud Type

6006-2rs-qbl Two Rubber Seals
0.02 KGS Standard

MCGILL MCF 35 S Cam Follower and Track Roller - Stud Type

65 11000
Open Type 5400

MCGILL MCF 32 X Cam Follower and Track Roller - Stud Type

Open Type Standard
Plastic 6.29 KGS

MCGILL SK 1104 Cam Follower and Track Roller - Stud Type

Open Type Light
19000 Standard

MCGILL VCF 5 1/2 Cam Follower and Track Roller - Stud Type

5600 rpm 6700 rpm
14000 N 2.00 mm

MCGILL VCF 2 1/2 Cam Follower and Track Roller - Stud Type

30mm 22600
0.20 KGS Plastic

MCGILL VCF 4 1/2 Cam Follower and Track Roller - Stud Type

160 mm 160 mm
180 mm 0.5 m/s

MCGILL PCF 5 Cam Follower and Track Roller - Stud Type

180mm 96.5
5300 Standard
2/12